Before the pool
Choose the largest dry item for the upper section and the actual footwear for the lower section. Check that closing the drawstring and the bottom zipper does not compress one item into the other.
Drawstring upper storage, mesh side panels and a separate lower zip compartment for a swim or gym kit.
MerrisBags offers factory OEM/ODM development, private labeling and coordinated shell, mesh, lining and strap sourcing.
Reference: US$1.50–6.50/pc · MOQ 500 · FOB Shenzhen. Final quote depends on the approved construction and quantity.
Before swimming, the bag may carry dry clothes, a towel and footwear. Afterwards, a damp suit and wet accessories change what needs separation. For this drawstring swim backpack, define that return-trip packing plan before specifying a wet section: the visible lower zip compartment alone does not prove a liquid-tight barrier.
Choose the largest dry item for the upper section and the actual footwear for the lower section. Check that closing the drawstring and the bottom zipper does not compress one item into the other.
Decide where the damp suit and towel will go. If either area must stop moisture reaching dry clothes, specify its liner, seams and closure conditions and assess the finished compartment.

The lower section has a horizontal zipper with two pullers. Its intended shoe use needs a fit check with the target shoe size and pair arrangement. No opened-compartment image confirms the internal depth or partition construction. Check how a loaded lower section changes the usable height and stability of the upper bag.
The side mesh is visible, but the photos do not show whether it forms a separate pocket, a main-wall panel or a layered construction throughout. Mark the parts that may breathe and the parts that must contain damp items. Do not assume visible mesh makes the whole bag quick-drying or compatible with submersion.
The model photographs show flat shoulder straps, adjustment hardware and a gathered top. Agree the usable strap range and the planned load, then review comfort, slipping and attachment points with the whole kit packed. Carry photographs do not establish a load rating or reinforced-joint test result.
The supplier graphic prints 34 × 20 × 45 cm and identifies a PU material direction. Confirm width, depth, height and the measuring points before using those numbers in a specification. They are not measured internal dimensions or a verified litre capacity, and they do not prove the size of the lower shoe space.
The reference front carries a TRAVEL motif; it is not your finished branding. Send your own artwork with the intended size and distance above the lower zipper. Review print or another proposed application on the chosen shell, including visibility when the top is gathered. Add any inside name label to the drawing separately.
For an OEM swim bag, list the shell, mesh, lower-compartment lining, partition, zipper, drawstring and webbing as separate components. The photo graphic says PU, but the earlier heat-sealed TPU pocket claim is not supported by an interior image or report. Choose and approve the actual barrier construction rather than treating the two descriptions as interchangeable.
Check the loaded packing plan, footwear fit, closure paths, print position and any agreed moisture test on the selected construction. Retain the component list and sample revision.
Require approval for material or zipper substitutions that affect separation or function. Confirm colour quantities, care instructions, packing and dates in the quotation; a catalogue lead time is not a confirmed production slot.
MerrisBags OEM development process
A material label in a supplier graphic is not a waterproof rating for the assembled bag. Mesh, seams, drawstring opening and zippers create different paths for moisture. Define the exposure conditions and request relevant evidence for the selected build before claiming whole-bag waterproof performance.
The supplied pictures do not show an opened, sealed TPU pocket or its test record. That earlier description should not define the order automatically. Specify the required wet-storage area, liner, seam construction and closure, then approve the sample and any applicable test.
Check with the intended shoe size, shape and packing orientation. The lower zipper is visible, but its internal dimensions and capacity are not measured in the photo set. Test the compartment with the upper section loaded as well.
No. Those are external reference dimensions printed in the supplier graphic. The gathered top, curved base, partition and actual loading affect usable capacity. Confirm measurement points and use a suitable capacity assessment if a litre claim matters to your programme.
MerrisBags accepts private-label OEM/ODM enquiries with artwork, panel position and colour quantities. Discuss the shell, mesh, straps and zipper colours together and approve branding on the selected material before production. The reference graphic is not an already-approved club design.
Compare the approved component list, packed sample, compartment separation, shoe access and strap settings. Identify any replacement liner, mesh or zipper before use and document the approval. Repeat the relevant functional checks if a change affects the wet-storage requirement.