Built for business-casual brands that need a slim document carrier — not a bulky multifunctional laptop tote. MerrisBags runs this style on our PU leather line: 40×32×2 cm profile, tablet inner sleeve, multi-layer shock padding, and an adjustable crossbody strap. Twelve years of workshop-direct OEM work; no off-the-shelf wholesale.
As a China OEM/ODM bag manufacturer based in Dongguan, MerrisBags produces to your spec. We hold no generic wholesale inventory — every run is contract-built for your brand.
Standard MOQ: 500 units per design and colorway (SKU PUTDCB-001).
Prototyping: Pre-production samples available for tech-pack verification (7–12 days lead time).
Slim 2 cm Business-Casual Profile
At 40×32×2 cm this bag sits between a tablet sleeve and a document folio — deliberately not a bulky multifunctional laptop tote. The flat silhouette slides under airplane seats and fits standard file cabinets. Procurement teams choose this format when the brief calls for tablet protection plus A4 document carry without the weight of a quilted 15.6-inch case.
Multi-Layer Scientific Compartments
The interior uses a layered partition system: padded tablet sleeve on one side, document pocket on the other, and a slim accessory slot for pens and cards. Each compartment is die-cut to ±1 mm tolerance so documents stay flat and tablets do not shift during crossbody wear.
Shock-Proof Tablet Inner Sleeve
A 3 mm EVA core with 5 mm perimeter bumper wraps the tablet compartment. Despite the 2 cm overall height, drop tests from 60 cm pass with zero screen-contact deformation. We adjust foam density if your program targets rugged-case tablets or bare-device corporate gifting.
Adjustable PU Crossbody Strap
The strap uses matching-color PU webbing with nickel hardware rated to 80 kg tensile load. Drop length adjusts from 50–110 cm for shoulder or crossbody carry. Strap anchor points are bartacked at four corners — a reinforcement detail most trading companies skip on slim-format bags.
Waterproof & Abrasion-Resistant Shell
PU panels receive seam sealing on all compartment perimeters plus a hydrophobic top-coat. The shell passes a 30-minute spray test with under 1.5 g interior moisture gain. Abrasion cycles exceed 5,000 rubs on the face panel — sufficient for daily subway commutes and conference-room table friction.
Blue & Black Colorway Options
Two factory colorways — blue and black — ship from stock for fast sampling. Pantone matching on shell, lining, and strap is available at 500 pcs MOQ. Hardware finish (nickel, gunmetal, gold) follows your brand guidelines without switching to a different bag platform.
Workshop-direct from Dongguan: 12+ years building PU leather business bags for export brands. Panel cutting, shock-padding lamination, and crossbody strap assembly on one floor.
CNC cutters handle PU leather panels at ±1 mm tolerance. Bartack machines reinforce crossbody strap anchors and compartment dividers before units move to final QC.
Sample room engineers build tablet document crossbody prototypes from your tech pack — testing shock-padding compression, waterproof seam sealing, and strap load capacity before bulk cutting.
Built for business bag buyers who need spec sheets, not sales decks.
Heat-press lamination bonds EVA shock pads to PU shell panels at controlled temperature. Compartment dividers are sewn with double-needle construction for pull strength above 60 N.
Incoming PU roll inspection, in-line foam density checks, and final packaging audit. Strap tensile load, seam waterproofing, and zipper pull force are logged per batch.
500-unit pilot runs for new collections; 20,000+ unit monthly capacity for repeat programs with dies already on file. Lead time holds at 25–30 days post sample approval.
Active BSCI audit status supports sourcing requirements from EU and North American retail chains. Ethical production documentation available on request.
Practical answers for buyers evaluating slim PU business carriers.
This 2 cm crossbody format targets tablet plus document carry. It is not a quilted 15.6-inch multifunctional tote — a distinction that matters for procurement teams scoping business-casual programs.
Sleeve width and foam density adjust per your device matrix. Send tablet model and case thickness — we cut a prototype sleeve before bulk dies are locked.
We stock 0.9 mm and 1.2 mm PU grades with matte and pebble textures. Abrasion and hydrophobic treatment specs are included in every pre-production sample report.
Send a tech pack or reference sample. We return a quoted BOM, sample timeline, and waterproof test report within 48 hours.
This style is engineered as a 2 cm slim-profile crossbody document carrier with a dedicated tablet inner sleeve — not a bulky multifunctional laptop tote. At 40×32 cm it fits tablets and A4 documents without the volume of a quilted 15.6-inch laptop case. Procurement teams use it for business-casual programs where a lightweight crossbody format outperforms a heavy commuter tote.
Despite the 2 cm height, the bag uses a three-layer sandwich: PU leather shell, 3 mm EVA shock pad, and microfiber tablet sleeve lining. The tablet compartment receives an additional 5 mm foam perimeter bumper. Drop tests from 60 cm pass with zero screen-contact deformation — a spec sheet detail most trading companies omit on slim-format bags.
The padded inner sleeve accepts tablets up to 11 inches (iPad Pro 11, Galaxy Tab S9) with slim cases. The adjacent document pocket holds A4 files and slim notebooks. We adjust sleeve width and foam density per your device compatibility matrix — useful for corporate gifting programs with a fixed tablet SKU.
PU panels receive a seam-sealing pass on all compartment perimeters plus a hydrophobic top-coat at 60 g/m². Zipper tracks use #5 reverse-coil pulls with PU tape backing. Combined, the assembly passes a 30-minute spray test with under 1.5 g interior moisture gain — sufficient for commute rain and coffee-spill scenarios in office environments.
Yes. The adjustable PU crossbody strap ships in matching shell color with nickel hardware rated to 80 kg tensile load. Two factory colorways — blue and black — are available from stock, and we match any Pantone on shell, lining, and strap webbing at 500 pcs MOQ. Strap width and drop length follow your tech pack dimensions.
MOQ is 500 pieces per style and colorway (SKU PUTDCB-001). Pre-production sample lead time is 7–12 days from approved tech pack. Bulk assembly runs 25–30 days after sample sign-off. Express air dispatch is available for reorders above 2,000 units with existing cutting dies on file.
